EasyManua.ls Logo

COMBA mBDA OD Series - KIT OF PARTS

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION GUIDE FOR mBDA OD SERIES
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 15
2.4 KIT OF PARTS
Table 1: Equipment KOP
Identifier
Function Description
Qty
Equipment
mBDA Unit
1
Power Supply Cable
4m
1
Mounting Rack1
mBDA-2633-5808
1
Mounting Rack2
mBDA-2633-5809
1
Masonry Bolt
M10x110
4
Mounting Rack Bolt
RRU-023L-5807
2
Hex Socket with Washer Bolt
M6x12
8
Modem Antenna
XD-WCDMA ( for Modem model only)
1
RJ45 Cable
1.5m
1
T-Shaped Pentagon Key Wrench
5mm
1
Factory Test Report
N/A
1
On CD-Rom
mBDA QE
This equipment manual.
1
Table 2: Equipment KOP of Second unit
Identifier
Function Description
Qty
Equipment
mBDA Unit
1
Power Supply Cable
4m
1
Mounting Rack1
mBDA-2633-5808
1
Mounting Rack2
mBDA-2633-5809
1
Mounting Rack Bolt
RRU-023L-5807
2
Hex Socket with Washer Bolt
M6x12
8
RS-485 Communication Cable
XM14J7P,0.2m
1
Factory Test Report
N/A
1
On CD-Rom
mBDA QE
This equipment manual.
1
Only when dual-band mBDA is required, and the KOP is for Second unit.
Table 3: Equipment KOP of Combiner unit
Identifier
Function Description
Qty
Equipment
mBDA-CB-BK2
1
Jumper1
0.14m, 401FJ
2
Jumper2
0.25m, 401FJ
2
Mounting Rack Bolt
RRU-023L-5807
2
Hex Socket with Washer Bolt
M6x12
5
Only when dual-band mBDA is required, and the KOP is for Combiner unit.
End of Section

Related product manuals