Need help?Do you have a question about the Comcast WIRELESS GATEWAY and is the answer not in the manual?
General introduction to the XFINITY Wireless Gateway and its all-in-one functionality for home networking.
Details the LED indicators on the front panel and their meanings for status checks and troubleshooting.
Describes the connectors and controls on the rear panel, including the reset button and ports.
Explains the WPS button on the top panel and the battery compartment on the bottom panel.
Provides details found on the device's bottom label, including network name and password.
Instructions to find the Wireless Network Name (SSID) and Password on the device's underside label.
Steps for connecting various Wi-Fi enabled devices like laptops and smartphones to the network.
Guide on logging into the Admin Tool and changing the default password for enhanced security.
Configuration options for the WiFi Network Name (SSID) and Encryption Method.
Instructions for connecting devices using WPS Push Button Configuration or PIN methods.
View network status, home network, and connected devices through the management interface.
Displays a summary of Local IP, WiFi, and XFINITY network connection statuses.
View and edit local network IP settings, including DHCP configuration.
Modify WiFi settings, network name, password, and add WPS clients.
Technical details about the XFINITY network, including modem and signal information.
Information regarding the gateway's model, serial number, processor speed, DRAM, and flash memory.
Details on the battery specifications, status, and remaining charge.
Information about connected wired devices and the status of the 4 Gigabit Ethernet ports.
Details about the gateway's 2.4 GHz WiFi hardware status and MAC address.
View and manage online and offline computers connected to the Gateway's LAN.
Configure website blocking, keywords, and trusted computers for parental control.
Enter URLs of websites to block and set specific time schedules for blocking.
Prevent access to specific applications and services by configuring rules.
Display information about devices managed by rules, allowing or preventing network access.
Allows specific incoming connections to be directed to a particular computer or server.
Temporarily opens incoming ports for specific outgoing connection triggers.
Configure a single computer on your LAN to open all of its ports.
Displays settings for automatic device discovery using Plug and Play (UPnP).
View System, Event, and Firewall logs to troubleshoot issues and identify security risks.
Run connectivity and IP address checks to troubleshoot network issues.
Enables resetting the gateway to factory defaults or specific module settings.
Change the administrative password for the Wireless Gateway.
Definitions of acronyms and technical terms used throughout the user guide.
General FCC compliance statements and information on radio frequency interference.
Information on FCC radiation exposure limits and part 68 statement for telephone connections.
To Next Page
General
