CONVERSip EP100 User
Sept ‘04 Comdial 21
:
Fixed Feature or
Programmable
Feature Button
• Steady red = the feature is on.
• Steady off = the feature is off.
Note: You can find the programmable buttons
that the installer designates feature buttons
through programming in the same location as
the DSS/BLF programmable buttons. Ensure
that these buttons are labeled correctly to
indicate their unique features.
MUTE button • On steady = called party cannot hear your
conversation.
INTERCOM button • Steady green or red = you are using your
intercom.
• Fluttering red = an LCD message is set on
your telephone for others to receive when
calling.
• Flashing orange = someone is calling your
extension or a call is being transferred to
you.
HOLD button • Winking green = a line is on hold at your
station.
MESSAGE button • Winking green = message awaits pick up.
SPEAKER button • On steady (with the telephone on hook and
busy) = speakerphone mode
• On steady (with telephone on hook and idle)
= background music is turned on.
Busy Lamp Field
(BLF) Lights Condition
To Next Page
Loading...
