EasyManua.ls Logo

Comdial CONVERSip EP100 - Pickup for Monitored Stations

Comdial CONVERSip EP100
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Answering Calls
34 Comdial Sept ‘04
1. Press INTERCOM.
2. Dial *4.
3. Dial extension number of ringing telephone.
4. Speak toward telephone, or lift handset if privacy is desired.
2.5.3 PICKUP FOR MONITORED STATIONS
Your telephone may have the personal intercom number of another
telephone appearing at a programmable button location. You can use
the light associated with this button to monitor the status of that tele-
phone, and you can press the button to make a call to that telephone if
you wish.
To monitor another telephone,
1. Observe the BLF light indications next to the Direct Station
Select (DSS/BLF) button:
• Off = Station is idle
• Flashing (if enabled) = Station has an incoming call
• On = Station is busy
To call an idle monitored station or to answer one that is ringing,
1. Note the BLF light condition.
2. Press assigned DSS/BLF button.
3. Speak toward telephone, or lift handset if privacy is desired.

Table of Contents

Related product manuals