Programming
80 Comdial Sept ‘04
3. Press programmable button for RESPONSE MESSAGE but-
ton location.
4. Dial 00
5. Dial # to save programming.
6. Press SPEAKER to end.
7. Label the button location.
To store a fixed RESPONSE MESSAGE button (delivers the same
message each time it is pressed),
1. Press INTERCOM.
2. Dial **6
3. Press programmable button for RESPONSE MESSAGE but-
ton location.
4. Dial message number (01-30) from list of messages. Note:
Programmed messages available for use are created by the
system attendant. See Section 5.1, LCD Message Delivery for
more details.
5. Dial # to save programming.
6. Press SPEAKER to end.
7. Label the button location.
To Next Page
Loading...
