Comdial DX-80 - Page 291

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-241
• Press [save ]
• 06-01-01~24-01 (UCD Group select Tenant number)
• Press [chg] to select the Tenant number to which this UCD Group is to be associated.
• Press [next ].
• 06-01-01~24-02 (UCD Group select Attribute)
• Press [chg] to select the Attribute for this UCD Group.
• Press [next ].
• 06-01-01~24-03 (UCD Group select Member(s))
• Press [show ].
• Press [next ], [back] to choose the Member to program.
• Press [chg].
• Input the extension directory number of the extension to assign as a Member.
• Press [save ].
• Repeat from [next], [back ] for additional Members.
• Press the Hold button when you have finished entering members.
• Press [next ].
• 06-01-01~24-03-01~24 (UCD Group select specific Member)
• Press [chg].
• Input the extension directory number of the extension to assign as a Member.
• Press [save ].
• Press [next ], [back] for additional Members.
• Repeat from Press [chg].
• Press the Hold button when you have finished entering members.
• Press [next ].
• 06-01-01~24-04 (UCD Group select Hunting Method)
• Press [chg] to select the Hunting Method for this UCD Group.
• Press [next ].
• 06-01-01~24-05 (UCD Group input No Answer Time)
• Press [chg].
• Input appropriate No Answer Time.
• Press [save ].
• Press [next ].
• 06-01-01~24-06 (UCD Group select Overflow 1 Timer)
• Press [chg].
• Input appropriate Overflow 1 Timer.
• Press [save ].
• Press [next ].