DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-247
Related Features
Uniform Call Distribution Groups Recorded Announcement Devices
Related Programming
Extension Application – Uniform Call Distribution – Attribute
Extension Application – Uniform Call Distribution – Members
Extension – Port Type
Conditions
a) All V.A. UCD Group Members must be assigned as Port Type “V.A.”
b) All ancillary RAD Devices must be recorded individually for the same announcement.
c) This is not required when using the DX-80 VP system for UCD Overflow announcements.
Default Setting
Extension Application – Uniform Call Distribution – Attribute = UCD (Range is UCD/V.A.)
Extension Application – Uniform Call Distribution – Members = NULL
Extension – Port Type = “EXT” (Range is EXT/V.A./VM)
Programming Abstract
• Select the UCD Group to be used as the V.A. (Voice Announcer) UCD Group.
• Program the analog ports connected to RAD Devices as Port Type “V.A.”
• Program the analog RAD ports into the V.A. UCD Group.
• Program the V.A. UCD Group as the Overflow Destination for the UCD Group.
Programming via the DET (Digital Extension Terminal)
Note: [back], [next], [show], [chg], [bksp], and [save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“++++++++.” (Note: This eight-character password can be changed.)
• Press [show ]. The DB Item Select screen displays.
Program analog extension port as Type “V.A.”:
• Input 01-nnn-21, then press [save ]. (Where “nnn” is the extension number of the analog port connected
to an ancillary RAD Device.) This advances to the selected extension Port Type database item.
• Press [chg] until the appropriate port type displays.
• Press the Hold button to return to the previous menu level or press the Volume button (up or
down) to return to the DB Item Selection screen or exit programming.
• Continue programming analog extensions as port type “V.A.” as required.
• Press the Hold button to return to the previous menu level or press the Volume button(up or down)
to return to the DB Item Selection screen or exit programming.
Program the Voice Announcer UCD Group:
• Input 06-01-01~24-02, then press [save ]. This advances to the selected UCD Group (01~24) Attribute
database item.
• Press [chg] until the appropriate attribute (V.A.) displays.
• Press [next ]. This advances to the Member database item for this UCD Group.
• Press [show ]. This advances to the first (of twenty-four) Member of this UCD Group.
To Next Page
Loading...
