DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-45
External Call Forward
Note: You cannot External Call Forward station 101.
1. Press [next ]. The display will read:
CALL FORWARD
n_ans ext follow
2. Press [ext]. The display will read:
_
bksp save chg
3. Input the telephone number (cell phone, other office, etc.) where calls are to be forwarded.
4. Press [save ].
You hear the confirmation tone and the display briefly shows the telephone number where CO Line transfers
will be routed. The extension returns to idle, the Auxiliary Lamp is lit green, and the display shows FWD in
the middle of the bottom row.
Follow Call Forward
1. Press [next ]. The display shows:
CALL FORWARD
n_ans ext follow
2. Press [follow]. The display will read:
FOLLOW ME
preset remote
Follow Me From another extension to this extension:
1. Press [remote ]. The display shows:
REMOTE SELECTION
del set
2. Press [set]. The display shows:
FOLLOW FM _
bksp save chg
3. Input the extension number where calls are to be forwarded from.
4. Press [save ]. The display shows:
FOLLOW FM XXX
co icm/co icm
5. Select the type of calls to forward.
• co = CO Line incoming or transferred calls
• icm/co = both intercom and CO Line calls
• icm = intercom calls only.
The display shows:
PSWD :_
bksp save chg
6. Input the password of the extension where the calls are to be forwarded from.
To Next Page
Loading...
