Making Calls
32 Comdial August, 03
3.6.2 CAMPING ON - BUSY STATION, WAIT FOR AN
ANSWER (CALL WAITING)
If the telephone you have called is busy, you can send a call-waiting
tone to the telephone and wait on the line for an answer (you must be
using the handset for this feature to work).
• To activate call waiting when you hear a busy signal,
1. DIAL *6 (called party hears tone).
2. WAIT on line for reply.
3. Called party can place the current call on hold or disconnect from the
call to answer your call-waiting tone, or choose to ignore your call-
waiting tone and continue current conversation.
• To cancel call waiting,
1. PRESS INTERCOM AND DIAL #6.
2. HANG UP OR PRESS SPEAKER to end.
• To answer a call-waiting tone if you receive one while on a
call,
1. HEAR short tone burst in receiver.
2. PLACE current call on hold, OR complete call AND HANG UP
(waiting call will ring at your telephone).
To Next Page
Loading...
