GCA70258 LCD Speakerphone Station User’s Guide
August, 03 Comdial 35
4. ADVANCED CALL HANDLING
4.1 Waiting For A Line (Queuing)
If all the lines in a line group are busy, you can place your telephone
in a queue to await an idle line.
• To queue for a line group,
1. PRESS INTERCOM.
2. DIAL the line group access code (see Line Group Access code table
on page for your system’s codes).
3. HEAR busy tone.
4. DIAL *6.
• If you have line appearance for a particular line and wish to
queue for it,
1. OBSERVE the busy status light (LED).
2. PRESS INTERCOM.
3. DIAL *6.
4. PRESS line button.
5. When line group is free, your telephone sounds several short tone
bursts. When you hear this, lift handset, hear dial tone, and place call.
• To cancel line queuing or line group queuing,
1. PRESS INTERCOM.
2. DIAL #6.
To Next Page
Loading...
