Other Advanced Features
78 Comdial August, 03
• To enable an auxiliary mode,
—SELECT enable/disable button to enable mode. Light associated with
button turns on and display denotes feature.
• To disable an auxiliary mode,
—SELECT enable/disable button. Light associated with button will turn
off and display no longer denotes the feature.
7.7 Account Codes
If the installer has arranged your system for account code entry, your
display may prompt you to enter an account code after answering a
call.
• To enter account code on an incoming call,
1. IF available, PRESS programmed ACCOUNT CODE button (the call
in progress is not interrupted).
2. IF not available, PRESS INTERCOM AND DIAL *04 (call is auto-
matically placed on hold).
3. DIAL account code. Your telephone automatically returns to the call
after you’ve dialed the complete account code.
CAUTION
With the exception of a headset
microphone, do not connect the audio
output of any external device to the auxiliary jack. Also, do
not connect the tip and ring leads of a telephone line to the
auxiliary jack. Do not connect any devices to the auxiliary
jack other than those mentioned above.
To Next Page
Loading...
