GCA70258 LCD Speakerphone Station User’s Guide
August, 03 Comdial 51
5. NONVERBAL MESSAGING
5.1 LCD Message Delivery
You can set system-supplied messages at your station to be received
and displayed by a calling LCD speakerphone.
• To turn on a message from your telephone,
1. PRESS INTERCOM AND DIAL *02.
2. DIAL the desired code number from your message list (01–30) on the
next page, OR PRESS HOLD button to scroll through the available
messages AND DIAL # to select.
• For a “Back At” message, dial the code for time numbers and colon
from dialing codes table.
(For example, DIAL # 00 01 29 04 05 for the time 01:45).
• For a “Call” message, dial code for telephone number of your new
location.
(For example, DIAL # 09 07 08 15 02 02 00 00 for the number
978–2200).
3. DIAL # AND PRESS SPEAKER to end message.
• To turn off the message and your intercom light,
—PRESS INTERCOM AND DIAL #02.
Note: See following page for LCD dialing codes.
To Next Page
Loading...
