GCA70258 LCD Speakerphone Station User’s Guide
August, 03 Comdial 57
6. PROGRAMMING
6.1 DSS Numbers
Storing another station extension number at a DSS/BLF program-
mable location allows you to monitor that station, dial with the press
of one button, or pick up or hold calls at that station quickly and con
-
veniently.
• To store an intercom number as a DSS number,
1. SELECT OPTIONS.
2. SELECT NEXT until the DSS
option appears.
3. SELECT DSS.
4. PRESS programmable button to
choose DSS/BLF button location.
5. DIAL extension number.
6. REPEAT the previous steps, OR
SELECT EXIT.
7. PRESS SPEAKER to end.
Note: Storing DSS numbers at button locations will overwrite any pre-
viously stored numbers.
Enter Ext:
EXIT
Designating an Extension
CAUTION
Do not attempt to program interactive
buttons; doing so can cause the system to
make features unavailable. If you inadvertently program
interactive buttons, you can retrieve their functions in the
following manner:
1. PRESS INTERCOM **1
2. PRESS the interactive button to be reprogrammed
3. DIAL 91, 92, or 93 (for buttons from left to right).
To Next Page
Loading...
