CommScope Touchstone TG6452 - Restoring Factory Defaults

1. Reset buon: Resets the Telephony Gateway as if you power cycled the device. Use a
pointed non-metallic object to press this buon.
2. Tel (1 - 2): Connectors for the phone lines.
3. 2.5GigE Ethernet connector: 2.5GigE connector for use with a computer LAN port.
4. 1GigE Ethernet connectors: 1GigE connectors for use with a computer LAN port.
5. MoCA: Indicates connecvity between the Telephony Gateway and other home devices
connected via the MoCA network.
6. Cable: Connector for the coaxial cable.
7. Power: Connector for the power cord.
Reset the Telephony Gateway to factory defaults
To reset the Telephony Gateway to factory defaults, press and hold the reset buon on the
back of the Telephony Gateway for more than 15 seconds. This restores the conguraon
parameters to the factory defaults. You may need to do this if a misconguraon has locked
out all access.
Chapter 5: Operate the Telephony Gateway
Touchstone TG6452 Telephony Gateway User Guide DRAFT Revision 2.3 33