ComNav Technology SinoGNSS M900 - User Management; Receiver Management; Data Transfer

M900 GNSS Receiver User Guide
23
4.3.10 User management
Use user management menu to change the password of account.
Enter the username and original password, then input the new password and
confirm it again, then click enter to change the password of account.
4.4 Receiver management
4.4.1 Data transfer
There are two ways to transfer raw data from the M900 receiver to your office
computer--internet or serial ports. Serial ports support RS232 (com1 and com2,
Lemo port) protocol; the internet support TCP and Ntrip protocol.