ComNav Technology SinoGNSS M900 - Serial Port Config; TCP;IP Config

M900 GNSS Receiver User Guide
24
4.4.1.1 Serial Port config
The data will output from the Lemo port of the receiver when you complete the com
port settings. Select proper baud rate and data flow, and click Enter, the
corresponding serial port will output data. The format of Data flow includes:
 Raw observation data: ComNav binary format raw data

Navigation data: Some standard NMEA messages and custom messages
 RTCM2.3, RTCM3.0, RTCM3.2
 Custom data: ComNav custom data
4.4.1.2 TCP/IP config