ComNav Technology SinoGNSS M900 - Data Record

M900 GNSS Receiver User Guide
28
M900 has internal radio model, the frequency range is 410-470Mhz and spacing is
12.5Khz, users can configure the radio settings in radio of Data Transfer.

Enable Use button
 Enter frequency, like 454.050, 454.1125, 455.000 and so on.

Choose Protocol, m900 supports Transparent, south, TT450 and MAC.
 Choose Power of radio and click Enter button, you will receive correction data by
radio.
4.4.2 Data record
Use the data record menu to set the storage mode for surveying date. Information is
shown below：
 Internal Memory: 8GB, could record for 2 months while using 1 Hz sample
frequency.

Show record name, status, data format, record mode and operation in table,
click Setup button to configure the data record settings.
CAUTION - Please be careful to click the Format Disk button. It will empty all your data files in
M900.