ComNav Technology SinoGNSS M900 - Ntrip Client

M900 GNSS Receiver User Guide
26
4.4.1.4 Ntrip client
The M900 support Ntrip Client. It allows you to acquire correction data from CORS
through Ntrip Client protocol.
Tips: You need to uncheck Use and click Enter button to disconnect them before you configure this
interface.
Here will show you how to set up Ntrip Client.
 Enable Use button

Enter IP address, Port, User name and Password of CORS
 Click Get List to acquire the Mount Point list

Choose one of mount points and click Enter button, you will receive correction