ComNav Technology SinoGNSS M900 - Page 33

M900 GNSS Receiver User Guide
33
 Check the Output data Information
log loglista//View the output data information about all the ports.
 Lockout/unlockout satellite system
Command
Description
(un)lockout bd2
(un)lockout Beidou system
(un)lockout gps
(un)lockout GPS system
(un)lockout GLONASS
(un)lockout Glonass system
Unlockoutall
Unlock all GNSS system
 NMEA data output
The serial port is for COM1, you can output any NMEA data through COM1. For
example:
log com1 gpgga ontime 1
log com1 gpgsv ontime 1
 Raw data output
Log com1 rawephemb onchanged // Output GPS ephemeris
Log com1 glorawephemb onchanged // Output Glonass ephemeris
Log com1 bd2rawephemb onchanged // Output Beidou ephemeris
Log com1 galephemerisb onchanged // Output Galileo ephemeris
Log com1 rangecmpb ontime 1 // Set com1 output raw data, the frequency is 1Hz.