Chapter
2
Hardware Installation
This chapter provides hardware installation information for the Compaq
Server Console Switch.
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that the following items are completed BEFORE performing any work on
the rack:
■
The leveling jacks are extended to the floor.
■
The full weight of the rack rests on the leveling jacks.
■
The stabilizing feet are attached to the rack, if it is a single-rack
installation.
■
The racks are coupled in multiple-rack installations.
■
Only one component is extended at a time. (A rack may become unstable if
more than one component is extended for any reason.)
To Next Page
Loading...
