Using the OSD 4-5
OSD Main Screen
Press Print Scrn to open the OSD menus. The OSD Main screen appears first.
The Main screen lists all of the ports in the system, the associated computer
names, and the status of each port. If you have a Dual Console 8-Port switch,
an A or B next to the status symbol identifies the console.
Figure 4-1. OSD Main screen
Table 4-3
Status Port Symbols
Computer is connected and running
Connected computer is not running or not operating properly
Tiered switch is connected and running
Tiered switch is not running or not operating properly
Identifies which user you are in a Dual Console configuration
A, B
Console identifier in a Dual Console 8-Port switch
Primary ports have a single port number. Secondary ports have the port
number of the primary switch they are attached to followed by a dash, and
then the number of the secondary port.
To Next Page
Loading...
