Hardware Installation 2-15
Cover Panel Installation
After the unit is fully installed, secure the front cover panel using the middle
hole, as shown in Figure 2-19.
Figure 2-19. Securing the front cover panel
NOTE: This installation supports the optional Switch Box Connector Kit, which provides
frontal access to a 4- or 8-Port switch for a keyboard, monitor, mouse, and power cord. If
desired, use this option in place of the front cover panel.
Completing the Installation
After your Server Console Switch is installed in the rack using one of the
methods listed in this chapter, proceed to Chapter 3, “Cabling.”
To Next Page
Loading...