4-8 Compaq Server Console Switch User Guide
Commands Screen
The Commands screen lists actions you can initiate.
Figure 4-3. Commands screen
Table 4-6
Commands Screen Functions
Field/Button Select/Click to… Alternate Method
Scan Enabled
automatically switch video from port to port
Press Alt + S
*Broadcast Active
simultaneously control more than one
computer in a single system
Press Alt + B
**Snapshot
record current keyboard and mouse settings
Press Alt + N
Reset
return to mouse and keyboard default
settings
Press Alt + R
Version
view firmware version information
Press Alt + V
*Note 1: Only one user may select Broadcast Active at a time.
**Note 2: Snapshot saves the mouse and keyboard information the switch uses to boot up
the computers. If you do not save the hardware settings when you install a switch system,
add or remove computers from the system, or change the mouse, keyboard, or monitor,
they are lost when power to the switch is lost or turned off and each computer must be
rebooted.
To Next Page
Loading...
