5-14 Compaq Server Console Switch User Guide
5. Highlight Mode and select Energy if you are using an Energy Star
compliant monitor or Screen if your monitor is not of that type.
CAUTION: Monitor damage can result from use of Energy Mode with monitors
that are not Energy Star compliant.
6. To enable the screen saver mode press Enter either in the Time Delay
or Mode fields
or
Highlight Test and
press Enter to start the screen saver mode
immediately. See the Table 5-3 for a description of the settings.
Turning off the screen saver
To turn off the screen saver:
1. If you are in screen saver mode, press any key on your keyboard and
then type your password if your console is password protected.
2. In the Advanced Menus screen, move the highlight to the Setup menu.
3. Highlight Security and press Enter; the Security Configuration screen
appears.
4. Highlight Time Delay and select OFF. Press Enter.
Blanking the monitor without locking the console
To blank the monitor without locking the console:
1. If you are in screen saver mode, press any key on your keyboard and
then type your password if your console is password protected.
2. In the Advanced Menus screen, move the highlight to the Setup menu.
3. Highlight Security and press Enter; the Security Configuration screen
displays.
4. In the Security Configuration screen, press Enter
twice with the New
Password and Repeat New fields empty.
5. Highlight the settings you want to change and use the + or – keys to
adjust values.
6. Highlight Test and press Enter to immediately start screen saver mode.
To Next Page
Loading...