Using the Simplified OSD 5-13
Locking the screen and keyboard
To lock the screen and keyboard:
1. In the Advanced Menus screen, move the highlight to the Setup menu.
2. Highlight Security and press Enter; the Security Configuration screen
appears.
SECURITY CONFIGURATION
Password – – – – – – – –
New password – – – – – – – –
Repeat new – – – – – – – –
Time Delay OFF
Mode SCREEN
Test
Figure 5-8. Security Configuration screen
3. Type your password and press Enter.
Passwords can be up to eight characters (case sensitive). You must enter
the new password twice for confirmation.
NOTE: The factory default password is OSCAR. Because the Caps Lock is disabled by
default, you must hold down Shift as you type each letter.
4. Highlight Time Delay and select the number of minutes from 1 to 254
before you want your screen saver to turn on.
To Next Page
Loading...
