Using the Simplified OSD 5-7
Changing Menu Attributes
In the Simplified OSD Attributes screen you can change the order of computer
ports from displaying the port number to displaying the port name. Other
attributes of the Simplified OSD screens, such as the position and color, can be
changed to suit the particular use of the system.
To change menu attributes:
1. In the Advanced Menus screen, move the highlight to the Setup menu.
2. Highlight OSD and press Enter; the Simplified OSD Attributes screen
appears.
OSD ATTRIBUTES
Resolution 320
Height 56
Horizontal 3
Vertical 4
Background 7
Highlight 6
Text 0
Delay Time 0
Order PORT
Figure 5-5. OSD Attributes screen
3. Highlight the settings you want to change and use the + or – keys to
obtain the desired value.
As you select different values, the effect of the changes is reflected
immediately on the display. Table 5-1 describes each of the available
menu attributes.
NOTE: While changing Simplified OSD attributes, it is possible to scramble the menu and
screens, making it difficult to correct the problem. If this occurs, reset the switch to its
default Simplified OSD values by pressing:
Esc + Esc + Print Scrn + F10 + Y + Enter
To Next Page
Loading...
