5-18 Compaq Server Console Switch User Guide
3. To assign a secondary switch to a port, highlight the port and use the
+ or – keys to obtain the appropriate values
or
To assign a monitor type, highlight the port you want and use the + or –
keys to obtain the value that corresponds to the particular monitor.
4. Press Enter to save the settings and exit the menu
or
F10 to restore default settings
or
Esc to exit the menu without saving the settings.
Switching Tiered Systems
To switch the Keyboard/Monitor/Mouse Switch Box to a computer that is
connected to the primary through a secondary unit, proceed as follows:
1. Press Print Scrn. The OSD Selection window appears on the monitor.
2. Type the number of the port to which the slave unit is connected
followed by a dash and the number of the port (on the secondary unit) to
which the computer is connected. For example, to switch to the
computer connected to port 3 of a secondary unit connected to port 1 of
the primary, press Print Scrn, 1, -, 3.
If the computer/secondaries are listed in the window by name
(as described in “Assigning Names to Switch Ports”), then type the
assigned name of the computer. If no secondary unit is connected to the
selected primary port, the command is canceled when you enter the
secondary number.
3. Press Enter.
To Next Page
Loading...
