4-10 Compaq Server Console Switch User Guide
Devices Screen
If your system includes one or more secondary switches in a tiered
configuration, you must make the primary switch aware of the secondary
switch by assigning a specific device type. In addition, if one or more of the
computers in your switch system have a special type of monitor, it may be
necessary to assign that monitor type to the port associated with that computer.
To modify a device, double-click on it or highlight it then click Modify.
Figure 4-5. Devices screen
Table 4-7
Devices Screen Functions
Button Click to… Alternate Method
Modify
display Device Modify screen to modify
port settings
Press Alt + M
Defaults
use the default device type and port
settings
Press Alt + D
OK
accept changes, close the current
screen, and return to the previous screen
Press Alt + O
Note: Highlighted port indicates selected device.
To Next Page
Loading...
