Using the OSD 4-13
To assign a unique name to a computer:
1. Click the port number of the computer.
2. Type the device name in the Names field.
Computer names can be up to 15 characters long, including only A-Z
upper and lower case, 0-9, and the dash character. Press Backspace or
Delete to delete an incorrect entry. Click the cursor anywhere on the line
to overtype.
3. Repeat steps 1 and 2 for each computer to be named.
4. Click OK.
To edit an existing port or name double-click on it, make any changes, then
click OK.
To Next Page
Loading...
