Compaq dc5800 - Microtower PC - Configuring Settings; Restoring Credentials

5. Click Set Password and type and confirm your password in the Set Password dialog box. Click
OK.
6. Click Apply. Click the Schedule tab. Click the Schedule Task arrow and select the automatic
backup frequency.
7. Under Start time, use the Start time arrows to select the exact time for the backup to begin.
8. Click Advanced to select a start date, an end date, and recurring task settings. Click Apply.
9. Click Settings, and select settings for Scheduled Task Completed, Idle Time, and Power
Management.
10. Click Apply, and then click OK to close the dialog box.
Restoring credentials
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click HP ProtectTools, and then click Backup and Restore.
3. In the right pane, click Restore. The HP ProtectTools Restore Wizard opens. Follow the on-screen
instructions.
Configuring settings
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click HP ProtectTools, and then click Settings.
3. In the right pane, select your settings, and then click OK.
10 Chapter 1 Introduction to security