Diagnostic Tools
4-21
Computer Setup and Diagnostics Utilities
The Computer Setup and Diagnostics utilities provide information you will need about the
workstation.
■
Computer Setup
■
Diagnostics
Y
Creating a Diagnostics Diskette
Y
Running Computer Checkup (TEST)
Y
Running View System Information (INSPECT)
Y
Running Diagnostic Utilities for Error Codes
Explanations and procedures for each utility are included in this chapter.
The Setup and Diagnostics utilities should be run in the following instances:
■
When a system configuration error is detected during the Power-On Self-Test (POST)
■
To change the factory default settings for some of the workstation features
■
To change the system configuration, which is sometimes necessary upon adding or
removing optional hardware
■
To set system configuration features
To Next Page
Loading...
