3-20
Compaq Professional Workstation AP550 Maintenance and Service Guide
Using the Multi-Mode (SCSI) Cable
The workstation ships standard with a three-device multi-mode (SCSI) cable that supports both
low voltage differential (LVD) and single ended (SE) devices and has a terminator 1 on one
end. The cable end connects to the internal LVD/SE connector on the system board, with the
remaining three connectors connecting to the devices in the drive bays.
1
Figure 3-19. Multi-mode cable (SCSI) with terminator
NOTE:
The multi-mode cable included with your workstation may differ from the one pictured.
For additional information about installing optional SCSI devices, refer to the documentation
included with the device option kit.
To Next Page
Loading...
