Diagnostic Tools
4-29
Running View System Information (INSPECT)
NOTE:
View System Information (INSPECT) will detect Compaq hardware. Devices from other
manufacturers may not be detected.
The View System Information (INSPECT) utility provides information about the system after it
has been configured, including:
■
System
■
Contents of the operating system startup files
■
System ROM
■
System storage
■
System ports
■
Current memory configuration
■
ROM version
■
Type of processor and coprocessor
■
Diskette, CD-ROM, and hard drives
■
Active printer and communication interfaces
■
Keyboard
■
Graphics
■
Windows files
■
Network status
■
Miscellaneous
NOTE:
You must create a diagnostics diskette
before
you can run INSPECT. Instructions for creating and
using the Compaq Diagnostic Diskette are located on the Compaq website: www.compaq.com
NOTE:
Categories or items of information displayed by View System Information (INSPECT) are similar to,
but may vary slightly from, those available in Compaq Diagnostics for Windows NT.
To run INSPECT:
1. Restart the workstation from the diagnostics diskette.
2. Press
Enter
to bypass the welcome screen.
3. Select
View System Information (INSPECT),
then press
Enter.
4. Select one of the available options:
Y
Print the inspect status.
Y
Save the inspect status to a file.
Y
Add comments to a parameter status.
Y
Exit the utility.
To Next Page