2 Compaq Professional workstation AP550 Maintenance and Service Guide
CD-ROM drive
location 3-9
spare part number 1-7
specifications 7-14
troubleshooting 4-16
CD-ROM test error codes 4-35
changing a setup password 5-4
changing power-on password 5-4
chassis/base pan
spare part number 1-4
clearing
power-on password 5-5
setup password 5-5
CMOS
clearing when corrupted 4-25
switch location 6-2
Compaq Diagnostics for
Windows NT 4-45
using 4-48
Compaq Insight Manager
agents 4-46
features 4-46
Compaq Management Agents for
Workstations 4-45
Compaq Restore CD 4-47
Compaq Support Software CD 4-47
Compaq Workstation Support
Software CD 4-47
components, system 1-3
Computer Checkup (TEST)
attended testing precaution 4-28
Computer Setup
accessing 4-22
exiting without saving
changes 4-25
restoring configuration from
diskette 4-25
restoring factory default
settings 4-25
saving changes and exiting 4-25
saving configuration to a
diskette 4-25
utility 4-21
configuration memory
See
CMOS
SW50 switch 6-2
connectors
diskette drive 6-2
embedded processor power
module 6-2
external 8-2
LVD/SE 6-2
power LED and power
switch 6-2
primary Ultra ATA/66 6-2
SCSI 6-2
secondary processor power
module 6-2
secondary Ultra ATA/66 6-2
serial port cable 6-2
Wake-on-LAN 6-2
Continuity RIMM
spare part number 1-6
converting
desktop to a minitower 3-59
minitower to a desktop 3-56
D
date, setting 4-23
deleting
power-on password 5-4
setup password 5-4
delimiter characters 5-7
desktop to a minitower,
converting 3-59
diagnostics
error codes, SCSI 4-39
prompted 4-27
quick check 4-27
utilities 4-21, 4-26
Windows NT 4-45
DIMM module, removing 3-36
direct memory access
system (DMA) 7-4
disconnecting CD-ROM drive
cables 3-16
diskette boot, re-enabling 5-8
To Next Page
Loading...
