Compaq Deskpro EP 6233 - Removing the Front Bezel; Removing Bezel Blanks

2-4
Upgrading the Computer
Writer: Lydia Sanchez Saved by: Lydia Sanchez Saved date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
Removing the Front Bezel
1. Turn off the computer and any external devices.
Disconnect the power cord from the power outlet and
disconnect any external devices.
2. Remove the computer access panel.
3. Push up on the two release tabs 1, then rotate the front
bezel away from the chassis to release it 2.
Removing the Front Bezel
✎
When replacing the front bezel, ensure that the bottom
hinge points are properly placed in the chassis before
rotating the front bezel back into its original position.
Removing Bezel Blanks
1. Turn off the computer and any external devices.
Disconnect the power cord from the power outlet and
disconnect any external devices.
2. Remove the computer access panel.
3. Remove the front bezel.