2-18
Upgrading the Computer
Writer: Lydia Sanchez Saved by: Lydia Sanchez Saved date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
Upgrading Graphics
Capabilities
On select models, graphics memory can be expanded by adding
an upgrade memory module of the same capacity. For models
that can be upgraded, the procedure is as follows:
1. Turn off the computer and any external devices, then
disconnect the power cord from the power outlet.
2. Remove the computer access panel.
3. Remove the screw that secures the AGP graphics board to
the computer chassis and remove the board from the AGP
slot.
Removing the Graphics Board from the AGP Slot
To Next Page
Loading...
