Guide to Features & Upgrades
2-27
Writer: Lydia Sanchez Saved By: Lydia Sanchez Saved Date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
5. While pressing the drivelock, pull the drive out of the drive
bay.
Removing a Drive from the 5.25-Inch Drive Bay
6.
Remove the drive from the drive bay and store in antistatic
packaging.
Installing the Cable
Lock Provision
The cable lock provision consists of a three-piece security
bracket. The bottom part of the bracket is attached to the
computer with a screw; the top part of the bracket covers the
screw and prevents its removal.
!
WARNING:
To avoid injury, use care in handling the separated
pieces of the cable lock bracket; metal edges may be sharp. Be
sure to install the bracket so that sharp edges do not extend from
the edges of the computer chassis.
1. Before installing the security bracket, remove the
thumbscrew nearest the rear connector panel. Note the
location of the notch near the thumbscrew.
To Next Page
Loading...
