2-28
Upgrading the Computer
Writer: Lydia Sanchez Saved by: Lydia Sanchez Saved date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
2. Separate the pieces of the security bracket by bending the
metal where the three pieces join.
3. Slide the tab on the narrow piece of the bracket into the
notch on the back of the computer and rotate this piece
toward the screw hole, then slide the U-shaped piece of the
bracket between the narrow piece and the computer.
4.
Position both pieces of the bracket over the screw hole and
secure the bracket to the computer with the screw provided.
5. Cover the screw with the flat portion of the security
bracket.
6. Install a padlock (not provided) to secure the top part of the
security bracket and inhibit access to the inside of the
computer. Install a cable lock (not provided) to inhibit
access to the interior of the computer and secure the
computer to a fixed object.
Attaching a Security Bracket with Padlock
To Next Page
Loading...
