Guide to Features & Upgrades
2-5
Writer: Lydia Sanchez Saved By: Lydia Sanchez Saved Date: 12/15/98 2:00 PM
Pages: 31 Words: 3829 Template: c:\msoffice\templates\comm.dot
File Name d_Ch2.doc Part Number 166811-002
4. Gently pull the subpanel, with the bezel blanks secured in
it, away from the front bezel, then remove the desired bezel
blank.
CAUTION:
Hold the subpanel straight when you pull it away from
the front bezel. Pulling the subpanel away at an angle could
damage the pins that align it within the front bezel.
Removing Bezel Blanks from the Subpanel (Desktop Shown)
✎
When replacing the subpanel, ensure that the aligning
pins and any remaining bezel blanks are in their proper
orientation.
Changing from a Desktop to a Minitower Configuration
1. Turn off the computer and any external devices.
Disconnect the power cord from the power outlet and
disconnect any external devices.
2. Remove the computer access panel.
3. Remove the front bezel.
4. Disconnect all power and data cables from the drives in the
5.25-inch drive bays.
To Next Page
Loading...
