EasyManua.ls Logo

Comparc BRONCO 255K XD - SECTION 3 INSTALLATION (Continued); Battery Connections; Engine Pre-Start Checks

Comparc BRONCO 255K XD
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PM1323
9.5mm (3/8")
12.7mm (1/2")
1
/
4
5
2
3
3-4 BATTERY CONNECTIONS
3-5 ENGINE PRESTARTS CHECKS
WARNING
Fuel gauge is located in front panel of
generator.
1. Fuel Cap.:Add Fresh Fuel Before Starting
Engine The Firts Time (See Engine Manual
For Specifications ).
Fill fuel tank to whitin 1/2"(13mm)of top.
check fuel level on a cold engine before use
each day.
2 Oil Dipstick. Check oil level after
fueling with unit on level surface. If oil level is
not up to full mark on dipstick add oil (see
engine manual for more specifications).
3 Oil fill tube. If fuel do not close to up
superior mark, add oil.
SEE SAFETY SIGNAL AT THE BEGINING THIS MANUAL
TOOLS NEEDED
1 Ignition switch.
2 Screw.
3 Battery Box Door.
4 Negative Terminal(-)
5 Positive Terminal (+)
Be sure ignition switch is on "OFF" position.
To connect battery: connect negative cable last.
To disconnect battery: disconnect negative cable first.
FULL
LEVEL
OIL
1
2
3
O
I
L
GASOLINE
FULL
5

Related product manuals