Comparc BRONCO 255K XD - Page 16

PM1323
Install & Prepare
wire f eeder
Use The Safety
Equiment
Install % Connect
the Equipment
Set Controls Start the Engine
Turn On Wire
Feeder
Begin to Weld
Install & Connect
the Equipment
Select the
Electrode
Begin to Weld
Wear Safety
Equipment
Set Controls
Start the Engine
Turn On The
Auxiliary
Equipment
Insert Electrode On
Electrode-Holder
Turn On Auxiliary
Equipment
Install % Connect
the Equipment
Install & Prepare
wire f eeder
Use The Safety
Equiment
Set Controls
Open Gas Valve
Start the Engine
Turn On Auxiliary
Equipment
Turn On Wire
Feeder
Begin to Weld
Install & Connect
the Equipment
Install & connect
high frequency
unit
Select the
Electrode
Insert Electrode
On Torch
Wear Safety
Equipment
Set Controls
Open Gas Valve
Start the Engine
Turn On The
Auxiliary
Equipment
Turn On High
Frequency Unit
Begin to Weld
SECUENCE TO WELD IN TIG PROCCESS ( GTAW )
SECUENCE TO WELD WITH SHIELDED METAL ( SMAW )
SECUENCE TO WELD WITH FLUX CORED ELECTRODE ( FCAW )
SECUENCE TO WELD IN MIG PROCCESS ( GMAW )
11