M a i n t e n a nc e l 5- 1 1
I n s p e c ti n g hos e s a nd ga s ke t s
Loose or damaged hoses and gaskets can allow moisture to seep into the closed-loop dry-
ing system.
1 Stop the dryer and lockout the main power. Allow the dryer to cool before
touching any possible hot surfaces.
2 Follow the hose routing of all the hoses in the dryer and inspect all hoses, clamps,
fittings, and gaskets.
3 Tighten any loose hose clamps or fittings.
4 Replace worn or damaged hoses and gaskets.
To Next Page
Loading...
Need help?
General
