Conair 100 User Manual

D Carousel Dryer - DC-1
Models 15, 25, 50, 75, and 100 with DC-1 Controls
Corporate Office: 412.312.6000 l Instant Access 24/7 (Parts and Service): 800.458.1960 l Parts and Service: 814.437.6861
USER GUIDE
UGD024/0304
www.conairnet.com
INTRODUCTION • Purpose of the User Guide • How the guide is organized • Your responsibilities as a user • ATTENTION:
Read this so no one gets hurt • How to use the lockout device • DESCRIPTION • What is the D Carousel Dryer? •
Typical applications • How it works • Specifications: D Dryer • INSTALLATION • Unpacking the boxes • Preparing for
installation • Mounting the dryer and hopper on a Processing Machine • Positioning the dryer on the floor; Mounting the
hopper on the throat • Mounting the dryer on the floor stand; Hopper on the throat • Mounting the dryer and hopper on
the mobile floor stand • Connecting the main power • Checking for proper air flow • Connecting the air hoses
•Connecting water hoses • Connecting the RTD probe • Mounting a loader on the hopper • OPERATION • How it works
• The DC-1 dryer control panel • D dryer DC-1 control functions • Control Function Description • To start drying • To stop
drying • Using the auto start countdown function • Setting high and low setpoint limits • MAINTENANCE

Conair 100 Specifications

General

Brand	Conair
Model	100
Category	Dryer
Language	English

Summary

Introduction to the D Carousel Dryer

ATTENTION: Read this so no one gets hurt

Crucial safety information to prevent injury. Read before operating the equipment.

How to Use the Lockout Device

Step-by-step guide for safely isolating the dryer from power sources during maintenance.

Installation of the D Carousel Dryer

Mounting the Dryer and Hopper on a Processing Machine

Connecting the Main Power

Procedure for safely connecting the dryer to the electrical power supply.

Checking for Proper Air Flow

Operation of the D Carousel Dryer

The DC-1 Dryer Control Panel

To Start Drying

Steps to initiate the drying cycle, including temperature settings.

To Stop Drying

Setting the High Setpoint Limits

Troubleshooting the D Carousel Dryer

How to Identify the Cause of a Problem

Methods for diagnosing malfunctions using control panel alarms and visual checks.

Shut Down Alarms

Diagnosing and resolving critical alarms that cause the dryer to stop automatically.

Passive Alarms

Identifying and addressing warnings that may affect drying quality but don't stop operation.

Replacing Fuses

Procedure for safely replacing blown fuses in the electrical enclosure.