D e s c r i p t io n l 2- 7
( C o n ti n ue d )
2
D e s c r i p t i o n
C a r o u s el Pl u s W S er i es Dr y e r O pt i on s
• Volatile trap (only in conjunction with aftercooler) - The volatile trap is recommended if
drying materials that produce volatile that condense into a waxy or oily residue and/or if
the material contains excessive fines.
• Precooler - The precooler reduces the temperature of air flow after the desiccant wheel
and before the process heater.
• Filter check - The Filter check sensor will activate a passive alarm when the process
filter is clogged or needs to be replaced.
• Heater current monitor - The heater current monitor measures the total amperage
across both the process and regeneration heaters and the pre-determined power consump-
tion values for the blowers and the control.
• CFM monitor - The CFM monitor measures the cubic feet per minute of airflow across
the inlet/outlet of the process blower.
• DeviceNet or SPI communications - Allows the dryer to be networked to industrial con-
trol systems. DeviceNet communications are standard. Alternate communications are
available.
To Next Page
Loading...
Need help?
General
