Typ i ca l A p p l i ca t io n s( co n ti n u e d )
The W Series Dryer can be used successfully in applications that require:
• A contamination-free drying environment.
• Drying temperatures within the ranges shown in the following table:
Model Drying Temperature Range
Low temperature (with precooler)* 100° - 150°F {38° - 66°C}
Standard 150° - 240°F {66° - 116°C}
High heat (with aftercooler)* 150° - 375°F {66° - 191°C}
Low-high (with aftercooler & precooler)* 100° - 375°F {38° - 191°C}
* See page 3-13 and Appendix B and C.
• Throughput rates of 150 to 400 lbs {68.1 to 149.2 kg} per hour (some materials can be -
run at a higher rate).
• Dewpoints of -40°F {-40°C}.
Use the aftercooler when:
• You are drying at temperatures over 240°F {116°C}.
• Throughput rates are less than 50% of the dryer’s rated capacity.
• You are pre-drying material at temperatures over 150°F {66°C}
Standard Dryer Features
• Dewpoint monitor / dewpoint control
• Audible and visual alarm
• Temperature setback
D e s c r i p t io n l 2- 3
2
D e s c r i p t i o n
To Next Page
Loading...
Need help?
General
