4 - 2 4 l Op e ra ti o n
C o n t r o l Fun c ti o n D es c ri p ti o ns - R W
C o n f i g u r a ti o n (c on t in u ed )
Autostart Setup screen
To access the ResinWorks Autostart screen:
1 Press the Settings button from the Home screen.
2 Press the Autostart Setup button.
The ResinWorks Autostart Setup screen provides the user with the ability to enable or dis-
able and set the start and stop time for dryer for each day of the week.
To setup Auto Start and Auto Stop:
1 Press the Enable button to enable Dryer Auto Start.
2 Press the Enable button next to each day of the
week you would like to set the Auto Start time.
3 Set the Auto Start time for each day you have
enabled.
4 Press the Enable button next to each day of the week you
would like to set the Auto Stop time.
5 Set the Auto Stop time for each day that you have enabled.
NOTE: Proper login is required to
change these settings.
✐
(continued)
NOTE: Autostart timer uses 24
hour time format. 00:00 is mid-
night. Note that this is a seven (7)
day repeating calendar, and not real
time.
✐
To Next Page
Loading...
