4 - 2 6 l Op e ra ti o n
C o n t r o l Fun c ti o n D es c ri p ti o ns - R W
C o n f i g u r a ti o n
( c o n ti n ue d )
Hopper Names screen
To access the Hopper Names screen:
1 Press the Settings button from the Home screen.
2 Press the Hopper Setup button.
3 Press the Hopper Names button.
The Hopper Names screen provides the user with the ability to customize the name of any
hopper in the system. This name will be displayed as the hopper name on all future
screens.
To customize a hopper name:
1 Press the text inside the box of the hopper you would like to rename. All hoppers
are factory named “16c Hopper Name”. (This is simply a space holder for a user
entered hopper name up to 16 characters.)
2 Use the keypad to
enter your new hop-
per name. Hopper
names can be up to 16
characters in total
length.
3 Press the enter button
when complete.
4 Use steps 1 through 3
to change the name of
each hopper you
would like to cus-
tomize.
NOTE: Proper login is required to
change these settings.
✐
NOTE: Changing the hopper display
name does not change the order of
the hoppers. This order is based on
the hopper communications settings
and can not be changed.
✐
(continued)
NOTE: Hopper names can be
changed multipe times as neces-
sary. Conair recommends naming
the hopper using whatever system
works for your application. Some
users may choose to name hoppers
by material type or color; others
may choose to name hoppers
based on physical characteristics,
such as CH-54 Hopper.
✐
To Next Page
Loading...
