4 - 4 4 l Op e ra ti o n
C o n t r o l Fun c ti o n D es c ri p ti o ns - R W
C o n f i g u r a ti o n (c on t in u ed )
Alarms
When an alarm occurs, an audible
sound will be triggered and the
operator interface will display a
flashing alarm message.
To view an alarm from any opera-
tor screen, press the Alarm button.
1 Press the Alarms button.
2 View the current alarms.
3 Decide if you want to Acknowledge Alarms, Silence and Acknowledge Alarms,
Reset All Alarms or clear individual alarms.
The following buttons are available from the Alarms log screen:
Previous - The previous button is used to select the previous alarm when
multiple alarms are displayed.
Next - The next button is used to select the next alarm when multiple alarms
are displayed.
Alarm History- Pressing the Alarm
History button will show a detailed
listof the alarm history.
Acknowledge All - The acknowledge all
button is used to acknowledge all the
alarms on the list.
Reset All Alarms - The Reset button is used to clear all alarms on the list. If the
condition has not been remedied, the alarm will reappear.
To Next Page
Loading...
Need help?
General
