4 - 6 4 l Op e ra ti o n
C o n t r o l Fun c ti o n D es c ri p ti o ns -
S t a n d Al o ne Co n f i g u r a t i o n ( c on t in u e d )
Passive Alarm Setup (1 & 2)
To access the Passive Alarm Setup screens:
1 Press the Settings button from the Home screen.
2 Press the Alarm Setup button.
3 Press the Passive Alarm Setup button for the Passive alarms you would like to config-
ure (screen 1 or screen 2- if applicable).
4 Enter the desired setpoint and delay (if applicable) for each alarm.
NOTE: Proper login is required to modify alarm settings. Depending on your dryer
configuration, you may have different alarm settings or different screen configurations.
✐
NOTE: Some alarms require
the user to enable the alarm,
and to choose between
Passive or Shutdown alarm
type. The first “power” button
enables or disables the alarm.
The second button chooses
between Passive or Shutdown
alarm.
✐
IMPORTANT: Factory
default alarm setpoints
should not be changed
without first consulting
with Conair.
Conair’s Instant Access
24/7 Parts and Service
number is
800-458-1960.
Outside the U.S., dial
814-437-6861.
To Next Page
Loading...
Need help?
General
