32
shock cord adjustment
You must use the shock cord available through Concept2.
Use of other shock cord will have a significant effect on
the performance of your machine.
Concept2 part number PN 1731.
3.
2.
1. Detach flywheel section and turn upside down.
Monorail shown upside down.
FRONT OF MACHINE
Shock Cord Pulleys (4) PN 1011
and Axles (2) PN 1130
Travelling Pulley Assembly PN 1756
Shock Cord (12.5') PN 1731
Flywheel Axle PN 1113
and Sprocket PN 1112
Idler Pulley PN 1024
Idler Axle PN 1130
FLYWHEEL SIDE
S.C.A.M.s (2) PN 1104
4.
To Next Page
Loading...
